Powder Handling

Model No. 2 Powder & Bullet Scale

Designed and manufactured with the utmost attention to accuracy and sensitivity standards. The Model 2 scale includes a magnetic dampened beam swing for extra fast readings plus, hardened and ground knife edges ride in precision milled stainless steel bearing seats that will not crack, chip or lose their alignment.


  • 505 grain capacity
  • 1/10 grain accuracy.
  • pour spout pan.
  • simple two counterpoise system.
  • 1/10 grain over/under graduations.

The graduated plate at the beam pointer is marked in 1/10 grain increments for easy reading of over or under charges. This eliminates the need to move the counterpoises to check powder charge variations.



Redding No2 Scales
99.95 GBP

Redding Model No2 Bullet & Powder Scales

Redding No2 Scales

Model 3 Powder Measure

Time proven accuracy and reliability
IMPORTANT: Redding Powder Measures Are Not Intended For Use With Black Powder!

The original Redding Model 3, time proven for accuracy and reliability. It has a micrometer metering chamber right in front for easy setting and reading.

The micrometer makes it is possible to record your favorite settings and return to the same place weeks later when you wish to create the same load. Precision machined cast iron frame to give you years and years of service.

All Redding Powder Measures feature hand honed frames and hard chromium drums for long life. An extremely sharp cutting surface easily cuts and meters even the most difficult powders.



Redding Model 3 Powder Measure
154.00 GBP

Redding Model 3 Powder Measure

Redding Model 3

Bench Stand

For convenient bench-top mounting of Redding Powder Measures. Will also fit all other Powder Measures with 7/8-14  thread mounting. This bench stand is not threaded; it is secured with a lock ring which enables you to rotate the measure to any desired position and permits quick dump of the reservoir.




Redding Bench Stand
39.95 GBP

Redding Bench Stand

Redding Stand

Model No. 5 Powder Trickler

Turn the knob and you add powder to the scale pan a granule or two at a time. Brings underweight charges up to accurate readings fast. Solid, stable, low center of gravity. A full pound of solid steel – it won’t squirm all over
your bench! Ideal height for most powder scales.



Redding No5 Trickler
27.50 GBP

Model No5 Powder Trickler

Redding Trickler

Competition Model BR-30 Powder Measure


Designed specifically for Benchrest Competition.

The Competition Model BR-30 Powder Measure is truly a competition model with some very special features. One of these features (the drum and micrometer) limits the overall charging range from a low of 10 grains (dependent upon powder density) to a maximum of approximately 50 grains.

As a result we do not expect this model to be the proper choice for everyone. If, however, you are a serious competitive shooter and your loading requirements are generally between 10 and 50 grains, this is certainly the measure to choose.

This measure uses all of the competition proven features of the Match-Grade Model 3BR. To achieve the most uniform powder metering possible for Benchrest Competition, at a targeted charge weight of approximately 30 grains, (hence the name BR-30) an entirely new drum and metering unit was created. The diameter of the metering cavity was reduced and the metering plunger was given a unique hemispherical or “cup” shape. This shape creates a powder cavity that resembles the bottom of a test tube to alleviate irregular powder settling and to enhance charge to charge uniformity.

A special operating handle was also created for this model. It’s a rotating handle, slightly heavier to help you maintain a more uniform stroke.



Competition Model BR-30
228.00 GBP

Redding Competition Model BR-30 Powder Measure

BR-30 Powder Measure

.17 & .20 Caliber Drop Tube Adapter for Measures


Redding Adds 17 & 20 Cal. Drop Tube Adapter for Powder Measures and Funnels!

The increase in popularity of sub .22 Caliber reloading continues to grow, and Redding responds to market demands by adding a new Lexan drop tube adapter for use with .17 and .20 caliber cartridges. The adapter is a simple friction fit and works with all Redding powder measures and the Redding powder funnel. Not simply a reducer, this adapter is manufactured with an integral chamber engineered and tested to provide smooth powder flow and reduced bridging as the powder flows through the smaller orifice for the .17 and .20 caliber case necks.



Redding Drop Tube Adapter
8.95 GBP

.17 & .20 Calibre Drop Tube Adapter For Measures

Redding Drop Tube Adapter


Case Prep Services

Tel: 07917 709165

Email: caseprepservices@outlook.com


Or use our contact form.

Print Print | Sitemap
© Case prep sevices